What is a Drone Gimbal?

What is a Drone Gimbal?

A drone gimbal is an electronic stabilization system that reduces vibration and keeps a camera steady even while the drone is in motion.2 axis gimbal drone Designed to be attached to the camera mount on a UAV (unmanned aerial vehicle), drone gimbals are powered by electronic motors and intelligent sensors that work together to compensate for movement in all three directions – pitch, roll, and yaw – with minimal camera shake. The gimbals also allow for the drone to be tilted up or down and left or right – useful for filming from various angles and for capturing a wide variety of angles in a single shot.

The gimbals can be adjusted manually by hand or automatically with software.2 axis gimbal drone The software analyzes the movements of the camera and gimbal and adjusts the servo motors accordingly. The gimbal can also be integrated into the drone’s flight controller so that the camera’s tilt angle can be controlled remotely.

Drone gimbals come in a variety of sizes and shapes to accommodate different cameras and drones.2 axis gimbal drone The most common are 2-axis gimbals that are used for cell phones and some consumer-grade drones. The camera is physically connected to two servo motors that move in the opposite direction of the internal measurements from the drone’s internal inertial measurement unit. The movement of the servos is measured with micro-electromechanical devices called MEMS (Micro-Electro-Mechanical Systems). This technology is similar to accelerometers and gyroscopes that are found in cellphones and drones. The gimbal controller then interprets the g-forces and the direction of those forces and sends those measurements to a computer inside the gimbal.

The computer can then translate these measurements and determine how much movement to compensate for in each of the three axes.2 axis gimbal drone The gimbal can also figure out whether a particular motion was intentional or unintentional, and then compensate for that too.

In some cases, the drone gimbals can even sense the force of a gust of wind and compensate for it without the pilot having to make any manual adjustments. This is what makes a drone gimbal so powerful, and it’s what allows professional filmmakers to capture smooth, flawless footage in almost any environment.

For example, a gimbal equipped drone can be used for bridge inspections to give operators an unobstructed view of the bottom side of the bridge span. This is helpful for inspecting the condition of the bridge and gathering valuable data.

A gimbal also reduces vibration that can interfere with the quality of footage captured by a drone camera. This is especially important for high-quality footage such as cinematic shots. With a drone gimbal, the footage will look sharper and clearer, and you’ll be able to capture better-looking photos and videos that can be shared on social media. For this reason, most drones today are equipped with a gimbal.